Renumber Viewports with Dynamo – landarchBIM

0
11

Since I have been doing a lot more documentation work in Revit
these days, I have become significantly more interested in
how Dynamo can automate certain documentation tasks. One task
that can always drive me crazy (especially in Revit) is
renumbering viewports on sheets.

There are several different ways you can renumber viewports. I
decided to use a simple ‘pick’ method so I wouldn’t have to do
any reordering in Dynamo. This method works well with a smaller number of views, though it might be worth
using a slightly more complex method if you have sheets full of
details that need to be renumbered.

If you’re interested in that, I would check out Nate Holland’s AU2015
presentation
(Practical Design Computation) and
additional class material (with .dyn files). He
demonstrates a method where he renumbers views based on
a letter/number grid. Since the AU presentation wasn’t
recorded, he also posted a screencast video.

sheet_grid

But when I was trying to get this simpler method to work, I was
having some issues setting the Detail Number
parameter. The standard Dynamo node,
Element.SetParameterByName, was producing very
unreliable results when I tried to set the Detail Number.

Even with a fairly small set of views, the node would fail
with at least one of the viewports. So after searching around,
I took a look at Nate’s example and found that he was using
Archi-lab’s BuiltIn Parameter nodes. These nodes are critical
to making this definition work.

This definition also uses several nodes from Clockwork and
Spring Nodes. Here it is:


renumber_def

The first node, Springs.SelectElements(ordered), allows you to
pick the viewports in the order that you want them to be
re-numbered. The Rhythm package also has a similar node with a
slightly more Revit-y interface.

Because Revit does not allow two viewports to have the same
Detail Number, the definition also requires a two-step
process. First, you have to set the Detail Numbers to a
temporary/placeholder character. I used letter characters to do
this. Then set the final Detail Numbers.

It is very quick and quite satisfying to see it work. Here
is the result in the basic sample project:

sheet_02.PNG

Read More

LEAVE A REPLY